NEWS
1、Check if the thermostat is working properly.
2、Check whether the transmission shift works normally.
3, check the fan belt tightness.
4, check whether the diesel tank oil inlet filter is clogged and damaged, and clean or replace the filter.
5, check and adjust the valve lash.
6, check and adjust the hand and foot brake pads and brake drum clearance.
7、Check whether the generator and starter motor are firmly installed, and whether the wiring is clean and firm, and check whether the carbon brushes and rectifiers are worn.
8, replace the oil in the oil pan, check whether the crankcase ventilation receiver is intact, clean the oil filter and diesel filter element.
9, check the cylinder pressure or vacuum.
10, check whether the wheel installation is firm, tire pressure is attached to the requirements, and remove the tread embedded debris.
11, due to maintenance work and dismantling parts, when reassembled to carry out forklift road test.
(1) The braking performance under different degrees, there should be no deflection, snaking. On steep slopes, the hand brake is tightened, can be reliable parking.
(2) Listen to the engine in the acceleration, deceleration, heavy or no-load operation, there is no abnormal sound.
(3) After road test for a certain mileage, check whether there is overheating at brake, transmission, front axle housing and gear pump.
(4) Fork lift speed is normal, there is no trembling.
12、Check whether the multi-way reversing valve, lifting cylinder, tilting cylinder, steering cylinder and gear pump work normally.
1、Check whether the thermostat works normally.
2, check whether the transmission shift work is normal.
3、Check the tightness of the fan belt.
4, check whether the diesel tank oil inlet filter is clogged and damaged, and clean or replace the filter.
5, check and adjust the valve lash.
6, check and adjust the hand and foot brake pads and brake drum clearance.
7、Check whether the generator and starter motor are firmly installed, and whether the wiring is clean and firm, and check whether the carbon brushes and rectifiers are worn.
8, replace the oil in the oil pan, check whether the crankcase ventilation receiver is intact, clean the oil filter and diesel filter element.
9, check the cylinder pressure or vacuum.
10, check whether the wheel installation is firm, tire pressure is attached to the requirements, and remove the tread embedded debris.
11, due to maintenance work and dismantling parts, when reassembled to carry out forklift road test.
(1) The braking performance under different degrees, there should be no deflection, snaking. On steep slopes, the hand brake is tightened, can be reliable parking.
(2) Listen to the engine in the acceleration, deceleration, heavy or no-load operation, there is no abnormal sound.
(3) After road test for a certain mileage, check whether there is overheating at brake, transmission, front axle housing and gear pump.
(4) Fork lift speed is normal, there is no trembling.
12、Check whether the multi-way reversing valve, lifting cylinder, tilting cylinder, steering cylinder and gear pump work properly.